Amana 12002193 Dual Ice Water Valve (Secondary)
(3 – 9 DAY FREE SHIPPING)
Used for Side by Side Ice and Water Models That Also Use The 12544002 Dual Water Valve (Primary)
Has (5/16″ Easy Slip Inlet) – (1/4″ & 5/16″ Easy Slip Outlets)
Replaces Part Numbers: 12002101, 12544102, 67001726, 67003311, 8171159, 12002101, 12544102, 67001726, 67003311, 67003659, Y12002101, 8171097, AH2003637, AP4009555, EAP2003637, PS2003637.
Installation Instructions:
- Pull the refrigerator away from the wall far enough so you can access the water line connection and work on the back of the refrigerator. Place a towel under the water valve assembly to catch water.
- Unplug the refrigerator or shut off the circuit breaker for the refrigerator.
- Turn off the water supply to the refrigerator.
- Remove the screws that secure the service panel on the back of the refrigerator and remove the panel.
- Remove the screw(s) that secures the mounting bracket to the frame of the refrigerator.
- Pull water valve out of refrigerator cavity.
- Disconnect each wire harness at each solenoid of valve (Keeping note where each one goes).
- Cut water tubes close to each port where they connect into old valve (Keeping note where each one goes).
- Next insert water tubes respectively as far as possible into ports of new water valve.
- Tug on the water tubes to make sure their seated properly.
- Attach wire harness leads to their respective solenoid coils.
- Insert water valve into refrigerator cavity and attach water valve mounting bracket screw(s).
- Turn water on and check for leaks.
- Take a glass & run about a quart of water thru the front dispenser to flush out air that is in the system.
- When all is good, attach back cover and slide refrigerator back into place.
Additional Information
Weight | 1 lbs |
---|