GE WR57X10028 Water Circulation Pump

$259.95
Free S&H Over $75

In Stock

SKU: WR57x10028 Category:

Description

WR57X10028 GE Ice Machine Circulation Pump
(Orders Over $75 get Free S&H)

This Pump Continuously Circulates Water From the Water Storage Container To and Across The Evaporator and Back to the Water Storage Container.
Replaces Part Numbers: 773824, AH304370, AP2071740, EAP304370, PS304370, WR57X10079.

Installation Instructions

  • First disconnect the power to the unit.
  • Remove all ice and drain water reservoir pan by removing drain cap.
  • Remove flip out chute and ice scoop bracket.
  • Remove water reservoir pan by removing front thumb screws.
  • Remove single 1/4″ head cap screw that holds plastic cover over pump.
  • Remove discharge hose from pump. Pull clear plastic 1/8″ diameter water supply line from notch in left edge of pump base.
  • Remove three cap screws holding pump.
  • After the three screws are removed the pump drops down. The electric connection must be unplugged. Pinch the tabs on either side to release the plug.
  • Remove pump out of machine.
  • Reverse the procedure to install the new pump.
  • Once everything is together, Connect the power to the unit.
  • Now would be the perfect time to run the machine thru a cleaning cycle.
  • Now it is all done and ready to start producing ice.

Additional information

Weight 3 lbs

CONSIDER THESE OPTIONS !