Reset Filter Indicator Light

How To Reset Your Filter Indicator Light

Whirlpool & Kitchen Aid Models:

  1. If the refrigerator has this:
    whirlpool refrigerator dispenser area
    Press OPTIONS BUTTON, Then LOCK BUTTON, Then MEASURED FILL BUTTON.
  2. FRENCH DOOR BOTTOM FREEZER
    At the touchpad hold (FAST COOL) and (ENERGY SAVER) buttons at the same time for 3 seconds or until you hear a beep.
    This will turn the light from orange to blue.
    (NOTE) If the fridge doesn’t beep after holding down the “Fast Cool” and “Energy Saver” buttons for 3 seconds, wipe the touchpad with a clean cloth and then press the buttons again.
  3. SIDE BY SIDE
    After changing the filter, Hold down the (FILTER) button for 3 seconds to reset the light.
    Hold the button down until it beeps or the light changes from orange to blue.
  4. FRENCH DOOR
    After changing the water filter, reset the status. Press and hold the (WATER FILTER) button for 3 seconds.
    When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.
  5. OTHER MODEL
    After changing the filter, reset the filter status light by pressing and hold the (LIGHT) and (ICE TYPE) buttons for 3 seconds.
    The status light will turn off when the system is reset.
  6. OTHER MODEL
    After changing the filter, touch (MAX COOL) and (MAX ICE) together for 3 seconds to reset the water filter.
    The display will do a 3-second countdown, then flash the icon and play a tone.

    7. Amana Models:

    1. TYPE 1
      After changing the filter, Press and hold the (AUTO) button and (DISPENSER LOCK) button until the water filter status indicator light flashes.
    2. TYPE 2
      After changing the filter, touch (MAX COOL) and (MAX ICE) together for 3 seconds to reset the water filter.
      The display will do a 3-second countdown, then flash the icon and play a tone.
    3. TYPE 3
      After changing the filter, reset the filter status light by pressing and holding the (FILTER RESET) button.
      The status light will turn off when the system is reset.
    4. TYPE 4
      After changing the water filter, reset the status. Press and hold the (WATER FILTER) button for 3 seconds.
      When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.

    Frigidaire & Electrolux Models:

    1. SOME MODELS:
      Hold the (RESET) Button Until the Green Light Flashes!
    2. NEWER MODELS:
      To reset a water filter light, if you have a touchpad, press the (OPTIONS) Button Then Press (WATER FILTER) Button – Then Press (SET) Button and wait for the flashing to start and stop.
    3. AIR FILTER:
      To reset an air filter light, on your touchpad, press the (OPTION) Button – Then Press (AIR FILTER) Button – Then Press (SET) Button.
      Once pressed, the air filter will have been reset.

    TO RESET A FRIGIDAIRE REFRIGERATOR:

    1. locate the (POWER FREEZER) Button and (POWER COOL) button within the appliance.
      When you have found them, hold them down simultaneously for a few seconds.
      Once this time has passed, release the buttons and the refrigerator should operate properly again.

    Maytag & Jenn-Air:

    Press the Light and Lock Buttons Until Filter Light Flashes!

    GE & Hotpoint Models:

    Hold the Reset Button for 5-8 Seconds!

    Samsung Models:

    Press the Ice Type and the Child Lock buttons Simultaneously for 3 seconds!