How to Replace Amana WF401 Water Filter

Product Page —-> Amana WF401s 12527304 Kenmore 46-9904 Filter

Replacement Instructions

  1. Locate the filter inside the refrigerator at the right rear in a vertical posititon.
  2. Twist the old filter counterclockwise until it is free.
  3. Remove the filter straight down and discard (the water will shut off automatically)
  4. Push the new filter into the fridge and Twist clockwise until it is fully in place.
  5. That’s all there is to it.
  6. Reset your ‘change filter’ light (if your fridge has one)

Resetting Your Filter Change Indicator

Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds or until the filter status indicator begins to flash, then release the buttons.

Maintenance For Refrigerator Water Filtration System

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.