WCI 218658000 Water Valve

Description

Frigidaire 218658000 Dual Ice & Water Valve (Secondary)

Has (5/16″ Threaded Inlet)-(2 Threaded Outlet Ports)
Replaces Part Numbers: AP2114865, 12764, AH428394, EAP428394, PS428394.

Replacement Instructions:

• Pull the refrigerator away from the wall far enough so you can access the water line connection and work on the back of the refrigerator. Place a towel under the water valve assembly to catch water.
• Unplug the refrigerator or shut off the circuit breaker for the refrigerator.
• Turn off the water supply to the refrigerator.
• Remove the screws that secure the service panel on the back of the refrigerator and remove the panel.
• Remove the screw(s) that secures the mounting bracket to the frame of the refrigerator.
• Pull water valve out of refrigerator cavity.
• Disconnect each wire harness at each solenoid of valve (Keeping note where each one goes).
• Disconnect water supply at valve by unscrewing compression nut.
• Disconnect water tubes connecting to each port (Keeping note where each one goes).
• Now to install water valve.
• Connect water supply line tighten nut until snug.
• Next connect water tubes respectively and tighten nuts until snug.
• Attach wire harness leads to their respective solenoid coils.
• Insert water valve into refrigerator cavity and attach water valve mounting bracket screw(s).
• Turn water on and check for leaks.
• Take a glass & run about a quart of water thru the front dispenser to flush out air that is in the system.
• When all is good, attach back cover and slide refrigerator back into place.