General Electric Refrigerator Water Filter Replacement Instructions

Discount & Free Shipping Over $75

GE MWFP MWF Kenmore 46-9970 Filter

Installation Instructions

  1. Locate Filter inside fridge and turn it 1/2 turn counterclockwise.
  2. Pull the old filter straight down and discard (the water will shut off automatically).
  3. Push the new filter gently up and in until it stops.
  4. Turn the filter clockwise until it stops.
  5. That’s how easy it is to replace the MWFP water filter.
  6. Reset your ‘change filter’ light (if your refrigerator has one)

Resetting Your Filter Change Indicator

For Refrigerators without LCD screens: Press and hold the ‘Reset Filter’ button on the dispenser for 3 seconds.
For Refrigerators with LCD screens: Press the ‘Filter Replaced’ button.

Maintenance For Refrigerator Water Filtration System.

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.


GE MSWF Smart Water Refrigerator Filter

Installation Instructions

  1. Locate Filter inside fridge and turn it 1/2 turn counterclockwise.
  2. Pull the old filter straight down and discard (the water will shut off automatically).
  3. Push the new filter gently up and in until it stops.
  4. Turn the filter clockwise until it stops.
  5. That’s how easy it is to replace the MSWF water filter.
  6. Reset your ‘change filter’ light (if your refrigerator has one)

Resetting Your Filter Change Indicator

For Refrigerators without LCD screens: Press and hold the ‘Reset Filter’ button on the dispenser for 3 seconds.
For Refrigerators with LCD screens: Press the ‘Filter Replaced’ button.

Maintenance For Refrigerator Water Filtration System.

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.


GE GSWF Kenmore 46-9914 Filter

Replacement Instructions

  1. Unlatch the plastic filter cover, and let it swing down to see the filter.
  2. Twist the old filter a quarter-turn counterclockwise and discard (the water will shut off automatically).
  3. Push the new filter in until it stops and Twist the filter a quarter-turn clockwise.
  4. Swing the plastic filter cover up until it snaps closed.
  5. That’s how easy it is to replace the GSWF water filter.
  6. Reset your ‘change filter’ light (if your refrigerator has one)

Resetting Your Filter Change Indicator

For Refrigerators without LCD screens: Press and hold the ‘Reset Filter’ button on the dispenser for 3 seconds.
For Refrigerators with LCD screens: Press the ‘Filter Replaced’ button.

Maintenance For Refrigerator Water Filtration System.

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.


Installation Instructions

1. Remove old cartridge by gently lifting the filter away from housing until first release, and then lift again to remove.
2. Align top of filter with cartridge holder and push until cartridge is fully seated.
3. While continuing to ensure cartridge is fully seated in the holder, gently rotate the filter (inward for Bottom Freezer Models and downward for Side by Side Models) until it can no longer rotate.
4. Run water from the dispenser (approximately 2 gallons or about 5 minutes) to clear any particles and remove air from the system.

Resetting Your Filter Change Indicator

For Refrigerators without LCD screens: Press and hold the ‘Reset Filter’ button on the dispenser for 3 seconds.
For Refrigerators with LCD screens: Press the ‘Filter Replaced’ button.

Maintenance For Refrigerator Water Filtration System.

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.