Jenn-Air Refrigerator Filter Replacement Instructions

Locate the filter in a flip down compartment at the upper right of the refrigerator and Unlatch the plastic filter cover. Let it swing down (so you can see the filter)
While pushing in, Twist the old filter counterclockwise until it is free.
Slide the filter straight out and discard (the water will shut off automatically)
Push the new filter into the fridge and Twist clockwise until it is fully in place.
Push the plastic filter cover up until it snaps closed
Reset your ‘change filter’ light (if your fridge has one)

Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds.
OR: until the filter status indicator begins to flash, then release the buttons.

Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.

Locate the filter inside the refrigerator at the right rear in a vertical position.
Twist the old filter counterclockwise until it is free.
Remove the filter straight down and discard (the water will shut off automatically)
Push the new filter into the fridge and Twist clockwise until it is fully in place.
That’s all there is to it.
Reset your ‘change filter’ light (if your fridge has one)

Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds.
OR: until the filter status indicator begins to flash, then release the buttons.

Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.