Samsung Refrigerator Water Filter Replacement Instructions

Discount & Free Shipping Over $75

DA29-00003G Water Filter Installation Instructions:

  1. Locate the existing filter and Twist a quarter-turn counterclockwise.
  2. Pull the filter straight down and discard (The water will shut off automatically).
  3. Push the new filter up into the fridge until it stops.
  4. Twist the filter a quarter-turn clockwise until Tight.
  5. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
  6. Flush 2 – 3 gallons of water from water dispenser. Some noise and spurting is common as air is purged from the system.
  7. That’s how easy it is to replace the DA29-00003G Water Filter.
  8. Reset your ‘change filter’ light (if your fridge has one).

Resetting Your Filter Change Indicator

Press and hold the ice type and child lock buttons (at the same time) for 3 seconds – the light should turn green.


DA29-00020B Water Filter Installation Instructions:

  1. Locate existing filter and remove it by turning it counter clockwise a quarter-turn and Pull the filter straight out (the water will shut off automatically).
  2. Push the new filter into the fridge until it stops.
  3. Twist the filter a quarter-turn clockwise until Tight.
  4. Flush 2 – 3 gallons of water from water dispenser. Some noise and spurting is common as air is purged from the system.
  5. It’s Really That Simple
  6. Reset your ‘change filter’ light (if your refrigerator has one)

Resetting Your Filter Change Indicator

Press and hold the Ice Type/Water Button for 3 seconds.